Advanced Anesthesia Machine from Chinese Factory with Certificated Electronic Anesthesia Vaporizer for Agent Consumption SD-M2000D+

Main unit

■Working modes: For the closed system, half closed system and half open system

■Application: Adult and Child and Neonate

■Pneumatically driven and electronically control

■Complete 3 grades audible and visual alarms

■When power supply fails, audible and visual alarms will arise. The machine will continuously work by battery.

■Low gas supply alarm: when O₂ supply pressure is over low, the machine will arise > (longer than) 7 seconds audible alarm.

■High pressure limitation: when airway pressure is higher than pre-set figure, the machine will automatically start protection function. The airway pressure will stop increasing (not increase any more) to keep patient safe.

■Low pressure protection: when O2 gas supply pressure is lower than 0.1MPa,the machine will automatically cut off N2O supply.

■ O2 Flush: 25L/min~75L/min

■ Gas Supply: O2: 0.28MPa~0.6MPa  N2O: 0.28MPa~0.6MPa  Air: 0.28MPa~0.6MPa

■Power supply: AC 220V, 50 Hz Built-in large volume Lithium battery, could continuously work for 3 hours.   

Anesthesia Ventilator

■Monitoring: VTI, VTE,Frequency, MV, I:E, Ppeak, Pmean, Pplat, Pmin, PEEP, FiO2, Cst, Cdyn, Rst      Optional: Et CO₂

■Respiratory modes: VCV, PCV, PSV, SIMV-VC, SIMV-PC,

Optional: PRVC, SIMV-PRVC

■Tidal volume:0,20～1500mL

■Electronic PEEP, convenient and exact. The variable orifice type flow sensor from Germany, makes sure the flow rate exactly be detected.

■ By intelligent alarm system, the alarm limits could be preset, and alarm logs(200 pieces)could be recorded.