CT high-pressure syringe Single Syringe Injection System

Flectrical Requirements 220VAC/110VAC,50 or 60Hz,200VA Operation Interface Available in English,  French, Spanish, German and Chinese Volume 0.1 ml to syringe capacity in 0.1 ml increments Pressure Preset limit:300 psi default, user settable from 50 to 350 psi in 1 psi increments Display: Real-time pressure curve Change threshold: Stop injection if pressure changing suddenly Alarm: Voice alarm and stop injection when over preset limit injection or Scan Delay 0 to 3599 seconds in 1 sec. increments Autofill Settable flow rate from 3-8ml/sec., volume from 10ml to syringe capability Multi-Phase 1-8 phases per injection Pause Phase 0~999 sec.in 1 sec. increments Hold Capability More than 30 minutes Storage Capabilities 1000 protocols Expel air locked Unable to inject unless expelling air Test injection Settable flow rate from 0.1-5ml/sec. volume from 0.1-10ml Heat maintainer 35~38°C(optional) Hand switch Hand switch control pause and continue injection (optional) Emergency stop function Clicking anywhere on the touch screen of the console or pressing any button on the injector arm to stop protocol injection Dimension Injector Arm and Pedestal:L:22.8”(58.0cm),W:12.5°(20.1cm),H:50.2“(127.5cm) Console:L:4.55°(11.55cm),W:12.68"(31.8cm),H:9.77°(24.81cm) Main controller:L:11.9°(30.2cm)W:7.4°(9.1cm)H:4.7°(12cm) Weight Injector Arm and Pedestal:16.5Kg Console:4.1Kg Main Controller:6.2Kg